CTG Training Pamphlet

OVERHANG SUPPORT

To help determine if a countertop overhang requires additional support, please reference the chart below. Two-thirds (2/3) of the countertop need to be supported. For example: 15” raised bar need 10” of supported area. Metal support bars are only available in black, and are not compatible with European Style cabinets, also known as full-overlay.

QUARTZ / QUARTZ TECH

NATURAL STONE

Overhang WITHOUT support Peninsulas & islands WITHOUT cutouts

10”

10”

Overhang WITHOUT support Peninsulas & islands WITH cutouts

10”

10”

Overhang WITH support Peninsulas & islands WITHOUT cutouts

Up to 10” past support

Up to 10” past support

Overhang WITH support Peninsulas & islands WITH CUTOUTS

Up to 10” past frame

Up to 10” past support

Raised bar WITHOUT support

10” past support not to exceed 1/3 width of top

up to 1/3 of width of top up to 10”

Raised bar WITH support

10” past support not to exceed 1/3 width of top (customer responsibility to ensure supports are of sufficient strength) *Calculate support every 24” in all scenarios* *Raised bars must have pony wall. 3/4” panels will not be approved*

10” past support not to exceed 1/3 width of top (customer respon sibility to ensure supports are of sufficient strength) *Calculate support every 24” in all scenarios* *Raised bars must have pony wall. 3/4” panels will not be approved*

Raised bar WITH existing support *Must be approved*

Spacing/Other

30 © 2025 Cabinets to Go Training Pamphlet V1 2025