Home Outlet Cabinet Program Associate Resource Guide

Audience: CCI Purpose: To provide best practices and SAGE expectations for a safe and proper cabinet installation Where to Access: Installer Resource Guide When should it be reviewed: CCI training / Review of CCI Resource Guide / Onboarding new CCIs

SPECIFICATIONS FOR SAFE & PROPER CABINET INSTALLATION

It’s important to ensure your site is prepared for proper and safe cabinet installation. Before you begin, ensure that you have all the proper tools and materials. • Level (preferably a 4-foot level or laser level) • Measuring tape • Stud finder • Drill and screws • Wood shims • Caulk and/or wood filler for finishing • Cabinet clamps for alignment Once you have all necessary tools, be sure to properly prepare the installation area. Site Preparation • Level Surfaces: Floors and walls must be level and plumb. Use a level to check for uneven surfaces. • Clean Workspace: Ensure the installation area is clean and free of debris for easy access to install. • Room Dimensions: Measure the walls, floors, and ceilings accurately to ensure cabinets fit as planned. Structural Requirements • Stud Placement: Locate wall studs and ensure they are spaced appropriately (typically 16 inches on center) to securely anchor cabinets. • Reinforcement: Ensure adequate wall reinforcement where heavy cabinets or appliances will be installed. Cabinetry Specifications • Square and Level Cabinets: Inspect cabinets to ensure they are square and free from defects. • Shimming: Use shims where necessary to level cabinets. Final Adjustments • Alignment: Ensure cabinets are aligned and evenly spaced, especially along runs. • Gaps and Seams: Verify tight seams between cabinets and fill gaps as needed. • Hinges and Doors: Adjust hinges for level doors and smooth operation. • Countertop Support: Confirm cabinets are structurally sound to support the countertop, especially heavy materials like granite or quartz.

REV 1.03.2025